Installation and Owner’s Manual –
(Post 2010 UL requirements)
Flyer/Architectural Spec
Fraba Safety Devices Brochure

The AUH SERIES – Extended-duty jackshaft commercial door operator (for rolling steel curtain doors) series, with chain hoist and floor level disconnect, available in 1/3, 1/2, 3/4, and 1 horsepower, various supply voltages and phases. Not to exceed 35 cycles per hour, 100+ cycles per day.

Ratings

• Maximum duty cycle: 35 cycles per hour, 100+ cycles per day
• Maximum door height: 24 feet

Features

• Solid state control circuit 
• Constant pressure required to close if no entrapment devices are installed 
• All steel frame
• Adjustable friction clutch
• 3/4″ Shafting and 1″ Jackshaft
• Pillow block bearings on output shaft
• Chain hoist with interlock and floor level disconnect
• #41 Chain and Sprocket, 1/3 & 1/2 HP
• #40 Chain and Sprocket, 3/4 & 1 HP
• Solenoid brake standard
• Motor overload protection
• Wired to accept reversing devices
• Internally adjustable limit switches
• High starting torque, continuous duty motor
• 24-Volt control circuit with OPEN, CLOSE and STOP 3-button station
• OPEN button (and single button) will automatically override down travel and reverse door to the full open position
• External terminals for single button (residential type) radio control

Factory Options

• Linear Photo Beam Kit: HAE00056
• MVP-MR 3-channel open-close-stop modular receiver installed: P/N 2650-159

Warranty

• 2 years